Kentrox AI296 Computer Hardware User Manual


 
A-8
AI296 Version 9.8x User’s Guide
AI296 System Codes: Crash Codes
Crash Codes
Crash codes report to the log port when a card crashes and you receive an AIswitch
fault message. This message indicates that the system has detected a serious
hardware or software fault.
Common Crash Codes
These codes are common to all software (not just Kentrox products). The first column
of Table A-7
displays the hexadecimal code for the error message. The second
column displays the decimal value for the same message. The third column provides
a description of the error message. Contact Kentrox Technical Support to report any
of the following crash codes.
Table A-7 Common Crash Codes
Error Code
Hexadecimal
Error Code
Decimal
Description
0001 1 Specifies a bus error.
0002 2 Specifies an address error.
0003 3 Specifies an illegal instruction.
0004 4 Specifies a zero divide error.
0005 5 Specifies a check instruction trap.
0006 6 Specifies a TRAPV error.
0007 7 Specifies a privilege error.
0008 8 Specifies a trace trap.
0009 9 Specifies an unused exception vector.
09xx >264 Specifies an illegal vector. xx is the vector number
(non-zero) used in place of the codes above to
ensure that the exact vector number is determined
if an exception occurs.