Kentrox AI296 Computer Hardware User Manual


 
AI296 Version 9.8x User’s Guide
AI296 Commands: diag-eth
9-31
2. Enter go. The system starts capturing data with the user-defined settings and
filters.
3. Enter
stop to stop capturing data.
Exiting the diag-eth Session
To exit the
diag-eth session, type quit. The [296] prompt appears.
Command Type
shell
Formats
diag-eth
The following formats apply to filters:
filter { add | delete } [ src
mac_address
] [ dst
mac_address
]
filter { add | delete } [ src
ip_address
] [ dst
ip_address
]
filter { add | delete } [ src
ip_address
#
port_number
]
[ dst
ip_address
#
port_number
]
filter { add | delete } [ src *#
port_number
] [ dst *#
port_number
]
filter { add | delete } protocol [ ip | tcp | udp | icmp | arp | osi ]
filter { add | delete } all
filter list
Parameters
add
Adds a filter.
delete
Deletes a filter.
src
Defines the source address (MAC, IP, or TCP/UDP)
for the filter being created.
mac_address
Defines the MAC address to use for either the source
or destination of the filter being created.
dst
Defines the destination address (MAC, IP, or
TCP/UDP) for the filter being created.
ip_address
Defines the IP address to use for either the source or
destination of the filter being created.
ip_address
#
port_number
Defines the IP address and the TCP/UDP port number
for either the source or destination of the filter being
created.