Filter
Top Products
AI296 Version 9.8x User’s Guide
Alias and Call Routing Configuration: Call Routing
8-6
Note: The alias name may include leading, trailing, or embedded wildcard
matching characters. You may enter an asterisk (*) which replaces zero or
more characters, a question mark (?) which replaces one character, or an
alias macro that starts with an equal sign (=).
For information on acceptable alias naming elements and conventions, refer to
section Source/Destination Protocol Tables for the AI198 Menu System on page
8-12.
5. To access menu
02+Simple alias translation, enter 2. Menu 8.2 appears:
6. To select
04 SLC routing translation, enter 4. Menu 8 reappears with the SLC
routing translation configuration items.
Important: Menu item
04 SLC routing translation is the only valid menu item for
AI296. Use SLC routing translations to route calls through cards that
support non-time division subchannel (TDS) connections.
7. (optional) If you are routing calls between two AI296 cards, enter
3, and the IP
address of the remote AI296.
8. For
04 Called address -, enter 4, and the the called (destination) address.
The called (destination) address defines the phone number being called.
Maximum length is 14 characters. The actual address or an alias macro can be
entered here.
>2
Menu 8.2
01 Simple alias translation
02 Multiplexed connection
03 Multiplexed only translation
04 SLC routing translation
21 Exit this menu with no changes
Enter item number and optional ",value" then push <CR> key
>