Filter
Top Products
AI296 Version 9.8x User’s Guide
AI296 Commands: debug
9-24
debug
Description
This command enables or disables the logging of debugging data.
Tip: You have to have logging turned on to view debug information from a shell
connection.
Command Type
shell
Formats
debug { alias | x25 | pvcfsm | asypvcfsm | nlipvcfsm | tpifsm |
modmuxfsm | allfsm | pppfsm | linkChange | bootp | all } { on | off }
Parameters
alias
Enables or disables the logging of alias translation debugging data.
x25
Used primarily by Kentrox Technical Support to isolate system faults.
pvcfsm
Used primarily by Kentrox Technical Support to isolate system faults.
asypvcfsm
Used primarily by Kentrox Technical Support to isolate system faults.
nlipvcfsm
Used primarily by Kentrox Technical Support to isolate system faults.
tpifsm
Used primarily by Kentrox Technical Support to isolate system faults.
modmuxfsm
Used primarily by Kentrox Technical Support to isolate system faults.
allfsm
Used primarily by Kentrox Technical Support to isolate system faults.
pppfsm
Used primarily by Kentrox Technical Support to isolate system faults.
bootp
Enables or disables the logging of bootp attempts so that users can
determine if the bootp process is still underway or if it has been
completed.
linkChange
Enables or disables the logging of debugging data when the PPP
protocol on a link has gone down.
all
Enables or disables the logging of all debugging data.
on
Enables the logging of specified debugging data.
off
Disables the logging of specified debugging data.