Filter
Top Products
Setting up the printer driver
2
C250P 2-67
2
Note
The Bonjour connection is a Mac OS X 10.4 function, it is the same func-
tion as the Rendezvous connection in Mac OS 10.3 or earlier.
2
Reminder
When turning the machine off, wait for 10 seconds or longer before turn-
ing it on again; otherwise the machine may not function normally.
Specifying Macintosh settings
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
2
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to “Installing the printer driver” on
page 2-22.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not re-
quired to change the settings. Bonjour/Rendezvous is a Mac OS X func-
tion. For Mac OS 9.2, connect using AppleTalk.
For Mac OS X
1 On the Apple menu, select “System Preferences”.
2 Click the “Network” icon.
3 From “Show”, select “Built-in Ethernet”.
4 Click the TCP/IP tab.
5 Select the items from “Configure” that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
6 If using an AppleTalk connection, click the AppleTalk tab, and then
check that the “Make AppleTalk Active” check box is selected.