Filter
Top Products
Installation and operation precautions
1
C250P 1-31
* Parts marked with an asterisk (*) are installed within the finisher and therefore are not shown in
the illustration.
No. Part Name Description
1 Exit tray 1 Collects printed pages
2 Upper door Opened when clearing paper misfeeds (See
p. 8-31.)
3 Horizontal transport unit cover Opened when clearing paper misfeeds from the
horizontal transport unit (See p. 8-31.)
4 Hole-punch waste container Removed when emptying hole-punch waste that
has accumulated from using the Punch settings
(See p. 7-6.)
5 Misfeed-clearing guide Opened when clearing paper misfeeds within the
finisher (See p. 8-31.)
6 Right-side door Opened when clearing paper misfeeds within the
finisher (See p. 8-31.)
7 Exit tray 2 Collects copies printed using the “Fold & Staple”
setting
8 Misfeed-clearing dial in folding
section
Turned when clearing paper misfeeds in the folding
section (See p. 8-31.)
9 Staple cartridge holder Removed from the stapler unit when clearing
jammed staples or replacing the staple cartridge
(See p. 6-13, p. 8-46.)
10 Misfeed-clearing dial 1 Turned when clearing paper misfeeds within the
finisher (See p. 8-31.)
11 Misfeed-clearing dial 2 Turned when clearing jammed staples or replacing
the staple cartridge, or for moving the staple
cartridge holder out to the front (See p. 8-46.)
12 Stapler unit Pulled out when clearing jammed staples or
replacing the staple cartridge (See p. 6-13,
p. 8-46.)
13 Front door Opened when clearing paper misfeeds or jammed
staples or when replacing the staple cartridge (See
p. 6-13, p. 8-46.)
14 Punch kit* Punches holes for filing printed pages when punch
kit is installed onto Finisher