Filter
Top Products
Troubleshooting
8
C250P 8-53
4 Lower guide FN3, and
then pull out any paper.
– If the punch kit is in-
stalled, pull out the
hole-punch waste
container FN3.1.
5 Return guide FN3 to its original position.
– If the punch kit is installed, insert the hole-punch waste container
FN3.1 into its original position.
6 Turn dial FN4 to feed the
paper, open the trans-
port unit cover, and then
pull out any paper.
FN3
FN3.1
FN4