Filter
Top Products
Using COMMAND CENTER
8-20 ADVANCED OPERATION GUIDE
Advanced > Protocols > Netware
This printing system supports both NDS and bindery printing in either print server
mode or remote printer mode.
NetWare setup requires installation of the following client software and logon with
Administrator Privileges. If you are unsure, please contact your network
administrator.
With Novell Client, creation of the NetWare print objects with the AdminManager
NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare
printing, you may use the NetWare Client from either Novell or Microsoft.
For Admin Privileges, network operations (creating queues etc.) require 'admin' or
'supervisor' privileges (or equivalent). Certain portions of AdminManager may be
inoperable if you attempt those operations without sufficient privileges.
Item Description
NetWare Protocol Enables or disables the Network Protocol.
Bindery Mode Enables or disables Bindery Mode.
Frame Type Sets the Frame type. You can choose from Auto, 802.3, Ethernet-II, SNAP or
802.2.
File Server (Primary) Enter the name of the primary File Server to use.
NDS Tree Enter the name of the NDS Tree.
NDS Context Enter the NDS Context.
Print Server Mode Enables or disables Print Server Mode.
Print Server Name Enter the Print Server Name.
Queue Polling Interval Enter the Queue Polling Interval in seconds.
Password (optional) Enter the Password, if required. Login to NetWare will be successful only if the
password set here matches the Print Server password set within the NetWare
utilities.
Remote Printer Mode Enables or disables Remote Printer Mode.
Remote Printer Name Enter the name of the remote printer.
Job Timeout Enter the timeout in seconds.