Filter
Top Products
Using COMMAND CENTER
ADVANCED OPERATION GUIDE 8-15
FAX > Receive > General
The table below provides a summary of the items displayed on the FAX reception
general page.
Item Description
FAX Receive Selects the FAX reception mode. The selectable option is different depending on
the destination. The choices are Auto (Normal, FAX/TEL, TAD or DRD) or
Manual.
DRD Pattern Selects the DRD pattern. This menu is available only for certain destination.
Receive Date/Time Selects On or Off whether to print the reception information such as the received
date, the received time, the transmitting party's information and the number of
transmitted pages on the top of the received documents.
2in1 Receive Enables or disables 2in1 reception.
Receive Bulk Print Enables or disables FAX bulk reception. When enabled, the FAX system prints
the received documents after its reception completes. It will be possible to make
copies during that reception.
Remove Switching
Dial Number
Specifies the remote switching dial number. Remote switching allows you to
initiate fax reception from a telephone connected to the FAX system.
Encryption Key No. Selects the encryption key number to use in the encrypted communication.
Number of Rings
(Normal)
Specifies the number of rings for Auto FAX reception (Normal).
Number of Rings
(TAD)
Specifies the number of rings for Auto FAX reception (TAD).
Number of Rings
(FAX/TEL)
Specifies the number of rings for Auto FAX reception (FAX/TEL).