Filter
Top Products
System Settings
5-20 ADVANCED OPERATION GUIDE
Selecting the Paper Feed Source
If an optional paper feeder is installed, it is also available for the default paper source.
1 Access Def. Paper Input.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2 Press S or T to select the paper feed location that you want to be used as the
default setting and press Enter. The display shows Completed and returns to
the Orig./Paper Set screen.
Selecting the APS (Auto Paper Selection) Media Type
Use the following procedure to designate the type of paper that will be used when
the Auto setting is selected for the paper source.
1 Access APS Media Type.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2 Press S or T to select the media type that will be used in the APS (Auto
Paper Selection) mode. Press Enter. The display shows Completed and
returns to the Copy Setting screen.
System Menu/
Counter
S or T
Common Setting
Enter
S or T
Orig./Paper Set
Enter
S or T
Def. Paper Input
Enter
System Menu/
Counter
S or T
Copy Setting
Enter
S or T
APS Media Type
Enter