Filter
Top Products
Optional Equipment
ADVANCED OPERATION GUIDE 9-3
Machine Parts
1 Left Cover — Open this cover if an
original jam occurs.
2 Original Insert Guides — Align these
guides to fit the width of the originals to
be copied.
3 Original Table — Set originals to be
copied on this table.
4 Original Eject Table — Originals that
have been copied are ejected and
stored here.
5 Ejection Extension — Open this extension when using larger sized originals
such as 8 1/2 × 13 inches Oficio II, 8 1/2 × 14 inches Legal and Folio.
Placing Originals in the Document Processor
1
Check that there are no other originals remaining in the document processor.
2
Be sure to fan through the originals a few times to separate the sheets before placing
them in the document processor.
3
Adjust the original insert guides to fit the
width of original to be copied.
4
Arrange the originals in order and place
them face up on the original table up to the
level indicator on inside of the rear insert
guide. Slide the leading edge of the originals
securely into the document processor as far
as they will go.
1
2 4 5
3