Filter
Top Products
ADVANCED OPERATION GUIDE Glossary-1
Glossary
AppleTalk
AppleTalk offers file sharing and printer sharing and it also enables you to utilize
application software that is on another computer on the same AppleTalk network.
APS (Auto Paper Selection)
When you want to copy from various sizes of originals at one time, this mode will
automatically select the size of copy paper that corresponds to each individual
original and will copy that original onto the paper size.
Auto Sleep
This mode is activated after a specified amount of time elapses. The machine goes
into an economy mode and a minimum amount of power is consumed. You can use
the operation panel to change the amount of time before the machine goes into the
Auto Sleep. The default setting is 30 minutes.
COMMAND CENTER
This is the home page that is installed in this machine. It can be accessed from a
Web browser by simply entering the appropriate IP address. You can then use the
browser window to verify this machine's operating status and make settings related
to security, network printing, scanning, FAX, verifying the operating status, and
advanced networking.
Default Gateway
This is the device, such as a computer or router, that serves as the entrance/exit
(gateway) to access computers outside of the network that you are on. When no
specific gateway is designated for a destination IP address, data is sent to the host
that is designated as the Default Gateway.
DHCP (Dynamic Host Configuration Protocol)
This is a protocol that automatically resolves the IP address, Subnet Mask and
Gateway address on a TCP/IP network. Use of DHCP minimizes the load of network
administration, especially on network environments with a large number of client
computers where it is not specifically necessary to assign a separate IP address to
each client, including printers.
dpi (dots per inch)
This indicates the number of dots printed per inch, and is the unit of printer and
scanner resolution.
EcoPrint
This is a printing mode that controls toner consumption. Pages printed in the
EcoPrint mode are lighter than pages printed in the normal mode. The default setting
is Off.