Kyocera KM-1820 Printer User Manual


 
Glossary
ADVANCED OPERATION GUIDE Glossary-3
IP Address (Internet Protocol Address)
The Internet Protocol address is a unique number that represents a specific
computer in a network. The format of an IP Address is four numbers separated by
dots, e.g. 192.168.110.171. Each number should be a decimal between 0 and 255.
IPP (Internet Print Protocol)
This enables output to the printer from a printer driver over the Internet or an intranet
and via an IPP port. Using IPP, output to a remote printer is possible over the
Internet.
Job
This refers to an independent block of data to be processed for scanning or printing.
A command that indicates the beginning and end of each job is included with each
block of scan and print data in order to enable the printer to differentiate that data
from the data for another job.
KIR
This is smoothing function. It uses software to enhance the printer’s resolution and
produce high-quality printing. The default setting is On.
KPDL
KPDL is Kyocera’s implementation of the PostScript page description language
Level3.
LDAP (Lightweight Directory Access Protocol)
An open protocol that uses TCP/IP to provide access to directories that support an
X.500 model and that does not incur the resource requirements of the more complex
X.500 Directory Access Protocol (DAP). For example, LDAP can be used to locate
people, organizations, and other resources in an Internet or intranet directory.
Logical Printer
This is a software interface that exists between the Windows OS and the printers
connected to it. A printer refers to the actual device that prints out, while a logical
printer refers to the software interface that resides on the printer server.
Low Power Mode
This mode is engaged when actions such as scan and print operations, use of the
operation panel, and transmission or reception of data do not occur for a
predetermined amount of time. At this point, the machine enters a waiting state that
automatically reduces power consumption. When a further predetermined amount of
time is exceeded, the machine will then enter the Sleep mode.
MP Tray
This is an abbreviation for the Multi-Purpose tray. The MP tray is used instead of the
cassette when printing on envelopes, postcards, transparency sheets, and labels.
NetBEUI (NetBIOS Extended User Interface)
This is a network protocol which enables the utilization of more advanced functions
on small-scale networks than do other protocols such as TCP/IP, etc.