Filter
Top Products
System Settings
5-16 ADVANCED OPERATION GUIDE
Size Settings
Registering Custom Original Size
If you normally copy or scan from an original size that is not registered in this
machine (non-standard size), it is convenient to register that size in advance. You
can register a custom original size within the following ranges:
1 Access Custom Orig.Size.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2 Press S or T to select Custom and press Enter. The Size Entry(Y) screen is
displayed.
3 Use the numeric keys to enter the Y dimension (width) of the original to be
registered.
Once the width is displayed, press Enter. The Size Entry(X) screen is
displayed.
4 Use the numeric keys to enter the X dimension (height) of the original to be
registered.
Once the height is displayed, press Enter. The display shows Registered and
returns to the Orig. /Paper Set screen.
Measurement X Range Y Range
Inch specifications 5.83 to 14.02 inches 3.15 to 8.50 inches
Metric specifications 148 to 356 mm 80 to 216 mm
System Menu/
Counter
S or T
Common Setting
Enter
S or T
Orig. /Paper Set
Enter
S or T
Custom Orig.Size
Enter