Filter
Top Products
Using COMMAND CENTER
ADVANCED OPERATION GUIDE 8-11
Printer Page
This section includes settings that apply to the printing function of the machine, such
as default print resolution or copy count. If the Admin password has been set, pages
in this section are available only to the Administrator.
Default printer settings will be overridden by the printer driver settings. Settings that
affect the machine, such as locking the operation panel, are found under Basic
page.
Printer > Defaults > System
The table below provides a summary of the items displayed on the Printer System
page.
Printer > Media Input
The Media Input page lets you configure paper trays by type and size. You can load
different paper in the input trays and specify the type or size using COMMAND
CENTER.
You can also configure the input trays at the machine’s operation panel. Refer to
Selecting the Paper Source on page 1-1.
To configure an input tray, click the Size drop down list and select the size which
matches the paper you will use in the input tray. Click the Type drop down list and
select the type which matches the paper. To specify the default input tray, click the
appropriate radio button under Default. Click the Submit button to take settings in
effect.
Item Description
Form Feed Timeout Adjusts the timeout between 1 and 495 seconds, after which a form feed will
occur in the absence of data. The default setting is 30 seconds.
Copies Sets the number of copies to print.
Page Orientation Switches portrait or landscape page orientation.
KIR Mode Switches KIR smoothing On or Off.
EcoPrint Mode Switches EcoPrint On or Off to reduce the amount of toner used. The default
setting is Off.
Resolution Changes the printing resolution from 300 dpi, 600 dpi, and Fast1200. The default
setting is 600 dpi.
Item Description
Default Determines the default tray to feed paper from.
Tray Displays the trays including those provided by option.
Size Sets the size for the input tray. For a full list of available sizes, refer to Paper
Selection.
Type Sets the type for the input tray. For a full list of available types, refer to Paper
Selection.