Filter
Top Products
The Lemur User Manual
103
7.1.3. Computers and Lemur connected to a Network
7.1.3.1.
Network with a DHCP Server
Most network sharing devices allow multiple connections and manage the attribution
of IP addresses through the DHCP protocol. These devices include WIFI/Ethernet Routers,
Airport Base Stations and ADSL/Cable Modems with routers.
You only need to configure all your devices - including the Lemur - to use the DHCP
mode.
7.1.3.2.
Network without DHCP Server
If you have multiple devices connected through a hub or switch, you may have to
configure them individually with a unique, static IP sharing the same network mask.
Use IPs like: 192.168.0.X or 10.0.0.X
Mask: 255.255.0.0
7.1.4. Lemur Network Setup
You open the Network Settings via the Settings button, which is the left-most
hardware button on top of the Lemur.
DHCP IP Configuration:
• Select “Automatic using DHCP”.
• If a DHCP server is available, the Lemur will obtain a DHCP IP address automatically. If there is
no DHCP server available, the Lemur will switch to Static IP configuration.
Static IP Configuration: