Filter
Top Products
MIDI Message Reference
98
preset: The variable chosen from the Variable menu that is converted to program change values
is shown here.
Scale: Type in the desired target scaling for the MIDI messages. Possible values range from 0 to
127.
Channel: Dial in the MIDI channel. If the value is a vector the second field will be extrapolated
automatically. Possible values range from 0 to 16.
6.1.1.6.
D0 – Channel Pressure
Another continuous controller used on a per MIDI channel basis.
pressure: The Variable chosen from the Variable menu that is converted to channel pressure values
is shown here.
Scale: Type in the desired target scaling for the MIDI messages. Possible values range from 0 to
127.
Channel: Dial in the MIDI channel. If the value is a vector the second field will be extrapolated
automatically. Possible values range from 0 to 16.
6.1.1.7.
E0 – Pitch Bend
Used to indicate a change in the pitch wheel. It is a 14 bit value providing a higher
resolution than control changes.
bend: The Vvariable chosen from the Variable menu that is converted to program change values
is shown here.
Scale: Type in the desired target scaling for the MIDI messages. Note that pitch bend values
range from 0 to 16383.