Filter
Top Products
The Lemur User Manual
97
key: Dial in the MIDI note number. If the value is a vector the second field will be extrapolated
automatically. You can always override this setting by putting in your own value.
pressure: The Variable chosen from the Variable menu that is converted to key pressure values is
shown here.
Scale: Type in the desired target scaling for the MIDI messages. Possible values range from 0 to
127.
Channel: Dial in the MIDI channel. If the value is a vector the second field will be extrapolated
automatically. You can always override this setting by putting in your own value. Possible
values range from 0 to 16.
6.1.1.4.
B0 – Control Change
The Control Change data is used to produce pseudo-continuous data (ranging from 0
to 127).
controller: Dial in the MIDI controller number. If the value is a vector the second field will be
extrapolated automatically. You can always override this setting by putting in your own
value. Possible values range from 0 to 127
value: The Variable chosen from the Variable menu that is converted to the controller values is
shown here.
Scale: Type in the desired target scaling for the MIDI messages. Possible values range from 0 to
127.
Channel: Dial in the MIDI channel. If the value is a vector the second field will be extrapolated
automatically. Possible values range from 0 to 16.
6.1.1.5.
C0 – Program Change
Used to change the patch number of synthesizers.