Filter
Top Products
Remove print cartridges
1 Make sure the printer is on.
2 Raise the scanner unit.
3 Remove both print cartridges.
4 Make sure the cartridge carrier lids are closed.
5 Close the scanner unit.
6 Press to turn the printer off.
7 Disconnect the power cord from the wall outlet.
8 Plug the power cord back into the wall outlet.
9 Press to turn the printer on.
10 Reinstall the print cartridges. For more information, see “Installing print cartridges” on page 95
W
F
II
P
R
IN
T
IN
G
11 Close the scanner unit.
12 Plug the power cord into the wall outlet.
13 Press to turn the printer on.
14 Reinstall the print cartridges. For more information, see “Installing print cartridges” on page 95.
Cover Open
Make sure that the scanner unit is closed.
Paper Out
1 Load paper.
2 Press .
Paper Jam
For more information, see “Jams and misfeeds troubleshooting” on page 137.
Printer Carrier Stall
1 Check the printer carrier for any obstructions.
2 Press .
For more information, see “Jams and misfeeds troubleshooting” on page 137.
Troubleshooting
145