Filter
Top Products
Transferring photos from a memory device to the computer using the control
panel
If the printer is connected directly to a computer, or connected to a computer through a wireless network connection,
you can transfer photos from a memory card or flash drive to the computer.
Notes:
• You cannot transfer photos from a memory device to a computer through an external network adapter that does
not support memory device connection.
• The printer may require that you select a computer (and a PIN if required by that computer).
1 Insert a memory card or a flash drive that contains the images you want to transfer.
2 After the memory device is detected, press .
3 Press repeatedly until Save Photos is highlighted.
4 Press .
5 Press or to select Computer.
6 Press .
If the computer is connected directly to the printer through a USB cable:
a Press to begin saving photos to your computer.
b Follow the instructions on the computer screen.
If the printer is connected to a wireless network, you will be asked to select the computer that you want to use.
a Press or to select a computer.
b Press .
If you set a PIN during network setup and are being asked for it:
1 Enter the PIN using the and to select a digit location and the and to select a value for that
digit.
2 Press .
c Press to begin saving photos to the computer.
d Follow the instructions on the computer screen.
Related topics:
• “Inserting a memory card” on page 56
• “Inserting a flash drive” on page 57
• “Transferring photos from a memory device to the computer over a wireless network” on page 73
• “Using the Network Card Reader” on page 91
• “Understanding the Photo Card Mode menu” on page 80
Viewing a slideshow of photos on the control panel display
1 Insert a memory card or flash drive.
2 From the control panel, press .
3 Press repeatedly until View Slideshow is highlighted.
4 Press .
Working with photos
65