Lexmark 4800 Series Printer User Manual


 
O: Indicates that the content of the toxic and hazardous substance in all the homogenous materials of the part is
below the concentration limit requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part
exceeds the concentration limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain
hazardous substances.
ENERGY STAR
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic
inputs.
16.4
Copying The product is generating hard-copy output from hard-copy
original documents.
13.6
Scanning The product is scanning hard-copy documents. 10.3
Ready The product is waiting for a print job. 9.2
Power Saver The product is in energy-saving mode. 6.2
High Off The product is plugged into a wall outlet, but the power switch
is turned off.
not applicable
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is
turned off, and the product is in the lowest possible power
consumption mode.
not applicable
Off The product is plugged into a wall outlet, but the power switch
is turned off.
0.2
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Notices
157