Filter
Top Products
7 After making your choices, press to save your settings temporarily.
8 Press .
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Related topics:
• “Loading original documents on the scanner glass” on page 32
• “Using the control panel” on page 78
• “Understanding the Copy Mode menu” on page 79
Adjusting copy quality
1 Load paper.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press or repeatedly until Copy is highlighted.
4 Press or to select the number of copies.
The number of copies is automatically set to 1.
5 Press .
6 Press repeatedly until Quality is highlighted.
7 Press or to choose among the following options: Normal, Photo, Auto, or Draft.
8 Press to preview the output.
9 Press to adjust the settings.
10 Repeat step 8 to step 9 as needed.
11 Press to save your settings temporarily.
12 Press .
Related topics:
• “Loading original documents on the scanner glass” on page 32
• “Using the control panel” on page 78
• “Understanding the Copy Mode menu” on page 79
Collating copies using the control panel
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies
as groups of pages (not collated).
Collated Not collated
Copying
35