Filter
Top Products
Changing the default scan settings
1 From the control panel, press or repeatedly until Scan is highlighted.
2 Press .
3 If your printer is connected to more than one computer:
a Press or repeatedly until the computer to which you want to scan is highlighted.
b Press .
If you set a PIN during network setup and are being asked for it:
1 Enter the PIN using the and to select a digit location and the and to select a value for that
digit.
2 Press .
4 Wait until the printer has finished downloading the scan applications list.
5 Press repeatedly until Change Default Settings is highlighted.
6 Press .
From here You can
Color Choose to scan your document in color or black and white.
Quality Choose a scan quality: Automatic, 150 dots per inch (dpi), 300 dpi, or 600 dpi.
Original Size Set the size of the original document: Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,
3 in x 5 in, 4 in x 6 in, 4 in x 8 in, 5 in x 7 in, 8 in x 10 in, or letter.
7 Use the control panel buttons to navigate the menu items and make your choices.
8 Press to save your settings.
Related topics:
• “Using the control panel” on page 78
• “Understanding the Scan Mode menu” on page 83
Scanning over a network
Setting a network printer to scan
Assigning a name to your computer
You can assign a name to your computer when you install the printer software for the first time. Choose this name
when you scan an item on the network printer and want to send the scanned image to your computer. The name of
the computer can be changed, as needed.
1 From the Finder desktop, double-click the Lexmark 4800 Series folder.
2 Double-click the Lexmark 4800 Series Center icon.
3 From the menu, choose Advanced Network Scan Settings.
4 In the Computer Name field, type in the name of your computer.
5 Click Save.
Scanning
53