Filter
Top Products
Chapter 2 Operation of Diagnostics
2-107
2.6 Output Test
Never touch the High Voltage Power Supply or Low Voltage Power Supply when
voltage is present.
Never touch the driving parts while the printer is operating.
Continuous activation of the Toner Motor (Yellow/Magenta/Cyan/Black), will cause
excessive toner to be supplied, do not run for more than 60 seconds.
Before executing the output test, be sure to read al of the "Caution" and "Prohibition"
described in the Output Test Readme.txt file in the folder where the Diagnostic Com-
mander has been installed
For the items marked <Warning!> or <Caution!> in the checking method, refer to the
"WARNING" and "CAUTION" statements mentioned above to prevent problems.
2.6.1 Executing output test
Click on the “Diagnostics Output Test” button, and the following screen will appear.
Click on the box on the left side of the item to be operated. A " √ " is displayed in the box and the operation
starts. If you click on the box again, the process is cancelled and the operation stops. However, some parts
will stop automatically after a specified time has elapsed. For the items that have a pull-down menu, select
the menu to be executed.