Filter
Top Products
1-32
14
Duplex Jam (Media Jam Duplex)
52
Duplex jam sensor cannot detect passage of paper within specified
time.
15
ROS Failure (Call for Service ROS Motor)
54
1. Laser power down.
2. SOS signal not detected.
16
Fuser Failure (Call for Service Fuser Failure)
55
1. Temperature exceeding 235°C detected consecutively 4 times.
2. Temperature below 120°C detected consecutively 4 times.
3. Resistance value of STS sensor over 2437KW detected
consecutively 4 times.
4. Target temperature is not reached more than 60 seconds after
the fuser lamp lighted up.
5. After the target temperature is reached, the fuser lamp was kept
ON for more than specified time.
6. Value of the STS sensor does not change after the lamp lights up.
7. Temperature exceeding 230°C detected during printing process
consecutively twice.
17
NV-RAM Error (Call for Service NV-RAM Error)
56
Error of NV-RAM
18
ADC Sensor Error (ADC Sensor Dustiness Warning)
57
Power down of ADC sensor
19
Fan Motor Failure (Call for Service Fan Motor Error)
58
Failure of Fan Motor
20
Low Density Error (Call for Service Low Density)
60
Toner density is low.
21
Firmware Error (Call for Service Firmware Error)
61
Error of software
22
Environment Sensor Error (Call for Service ENV Sensor Error)
62
1. The temperature over +100°C or below -20°C was detected.
2. The humidity over 100% was detected.
23
Yellow Toner Empty (Yellow Toner Low)
63
Yellow toner emptied.
24
Magenta Toner Empty (Magenta Toner Low)
64
Magenta toner emptied.
25
Cyan Toner Empty (Cyan Toner Low)
65
Cyan toner emptied.
26
Black Toner Empty (Black Toner Low)
66
Black toner emptied.
27
PHD Life Over (Replace Imaging Unit)
67
Imaging Unit (PHD) life expired.
28
BTR Life Over (Replace Transfer Unit)
68
Transfer Unit (BTR) life expired.
29
Fuser Life Over (Replace Fuser Unit)
69
FUSER ASSY life expired.
Reference FIP
Name of error
Reference
FIP page #
Contents of error