Filter
Top Products
Chapter 3 Removal and Replacement Procedures
3-173
RRP3.19 CLUTCH ASSY TURN (PL3.3.17)
Figure: CLUTCH ASSY TURN Removal
Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CASSETTE REAR. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove the PICKUP ASSY. (RRP3.12)
10) Release the hook at 1 position securing the STOPPER CLUTCH (PL3.3.16) to the shaft on the right
side shaft of the PICKUP ASSY (PL3.3.1).
11) Pull out the STOPPER CLUTCH from the shaft of PICKUP ASSY.
12) Remove the connector (P/J475) of the CLUTCH ASSY TURN from the PICKUP ASSY.
13) Pull out the CLUTCH ASSY TURN from the shaft on the right side of the PICKUP ASSY.
Replacement
Replace the components in the reverse order of removal.