Filter
Top Products
1-90
FIP-P9 Crease
Condition / initial check
Crease on print
∆ Print on creased paper.
▼ Initial check ▼
Incorrect parts, improper installation, damage, deformation, dirt, foreign substance attached, etc.
∇ Major parts to be checked ∇
PAPER FEEDER, CHUTE ASSY REGI, CHUTE ASSY OUT, Transfer Unit (BTR), FUSER ASSY
Item Check Remedy
1
Wet paper
Do the wrinkles disappear if the paper is replaced with
newly unpacked paper?
Replace the paper
(Ask the customer to store the paper in a
dry place)
2
Faulty FUSER ASSY
Check the HEAT ROLL and NIP BELT for evidence of
damage, dirt, or foreign substances.
Replace the FUSER ASSY
3
Paper skew feed
Check if the paper is fed on the skew
Go to FIP-P8
4
Faulty paper transfer path
Check the paper transfer path for presence of burrs,
foreign substances or dirt.
Clean or replace the parts concerned
5
Faulty paper transfer rolls
Check the paper transfer rolls for evidence of foreign
substances, dirt, deformation, or malfunction.
Clean or replace the parts concerned