Filter
Top Products
Chapter 3 Removal and Replacement Procedures
3-137
Removal
1) Remove the COVER MSI. (RRP1.11)
2) Remove the TRAY ASSY MSI. (RRP1.12)
3) Remove the ASSY FRONT IN RRP. (RRP 1.10)
4) Release the strap from the CHUTE ASSY IN. (RRP 5.1)
5) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
6) Release the latch at B from the printer and open the CHUTE ASSY OUT.
7) Shift the pin at the tip of the LINK:L (PL1.1.23) from the leaf spring at the back of the COVER ASSY
FRONT.
8) Remove 2 screws securing the COVER ASSY FRONT to the CHUTE ASSY OUT (PL6.1.1).
9) Release the hooks securing the COVER ASSY FRONT at 2 positions to the CHUTE ASSY OUT.
10) Remove the COVER ASSY FRONT from the CHUTE ASSY OUT.
Replacement
Replace the components in the reverse order of removal.