Filter
Top Products
Advanced Settings
103
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
3. Click the Edit button.
The Edit Wireless Card screen displays.
4. Change the settings.
5. Click the Accept button.
The changed settings are shown in the table on the Wireless Card Access List screen.
To delete a wireless device from the access list:
1. Select ADVANCED > Advanced Setup > W
ireless Settings.
The Advanced Wireless Settings screen displays.
2. In the table, select the radio button next to the wireless device that you want to remove.
3. Click the Delete button.
The address is removed from the table on the Wireless Card Access List screen.
Wireless Distribution System
You can set the modem router up to be used as a wireless base station or a wireless repeater
in a wireless distribution system (WDS). A WDS lets you expand a wireless network through
multiple access points. A wireless base station connects to the Internet, can have wired and
wireless clients, and sends its wireless signal to an access point that functions as a wireless
repeater. A wireless repeater can also have wired and wireless clients, but connects to the
Internet through the wireless base station. The following figure shows a wireless repeating
scenario.
Repeater
Base station
access point
access point
Figure 17. Wireless repeating scenario