Filter
Top Products
NETGEAR genie Basic Settings
29
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
Encapsulation is PPPoA
These fields display only when you select PPPoA from the Encapsulation menu. You cannot
select an ISP radio button with the PPPoA selection.
Figure 15. Internet Setup screen: fields that are specific to PPPoA encapsulation
• Login. The login name that you use to log in to your ISP. By default, the login name is
guest.
• Password. The password that you use to log in to your ISP.
• Service Name (if Required)
. If your ISP provided a service name, enter it here.
• Connection Mode.
This field is masked out and not available.
• Idle Timeout (In Minutes). In almost most scenarios, this field is masked out and is not
available. If it is available and you want to change the login time-out, enter a new value in
minutes. This setting determines how long the modem router keeps the Internet
connection active after there is no Internet activity from the LAN.
A value of 0 (zero)
means never log out. The default setting is 5 seconds.
Internet IP Address.
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address.
Your ISP
automatically assigns these addresses.
• Use Static IP Address. Enter the static IP address that your ISP provides.
For the Domain Name Server (DNS)
Address and NAT (Network Address Translation)
sections, see the following section, Internet Setup Screen Fields: Fields That Display
Irrespective of Whether Login Is Required.