Filter
Top Products
Advanced Settings
123
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
By default, this check box is selected. You can disable UPnP for automatic device
configuration. If you clear the Turn UPnP On check box, the modem router does not allow
any device to automatically control the resources, such as port forwarding (mapping), of
the modem router.
3. Type the advertisement period in minutes.
The advertisement period specifies how often the modem router broadcasts its UPnP
information. This value can range from 1 to 1440 minutes. The default period is
30 minutes. Shorter durations ensure that control points have current device status at the
expense of additional network traffic. Longer durations can compromise the freshness of
the device status, but can significantly reduce network traffic.
4. Type the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP packet
sent. Hops are the steps a packet takes between routers. The number of hops can range
from 1 to 255. The default value for the advertisement time to live is 4 hops, which is fine
for most home networks. If you notice that some devices are not being updated or
reached correctly
, it might be necessary to increase this value.
5. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing
the modem router and which internal and external port that device has opened. The
UPnP Portmap table also displays what type of port is open and whether that port is still
active for each IP address.
6. (Optional) T
o refresh the information in the UPnP Portmap
Table, click the Refresh button.
IPv6
You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
To set up an IPv6 Internet connection type:
1. Select ADVANCED > Advanced Setup > IPv6
.
2. Select the IPv6 connection type from the menu.
Your Internet service provider (ISP) can provide information about your IPv6 connection.