Filter
Top Products
Getting Started
18
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
NETGEAR genie Setup
NETGEAR genie runs on any device with a web browser.
To use NETGEAR genie to set up your modem router:
1. Turn on the modem router by pressing the On/Off button.
2. Make sure that your computer or wireless device is connected to the modem router with an
Ethernet cable (wired) or wirelessly with the preset security settings listed on the product
label.
3. Launch your Internet browser
.
• The first time you set up the Internet connection for your modem router, the browser
goes to http://www.routerlogin.net, and the NETGEAR genie screen displays.
• If you already used the NETGEAR genie, type http://www.routerlogin.net in the
address field for your browser to display the NETGEAR genie screen. See Use
NETGEAR genie after Installation on page 19.
4. Follow the onscreen instructions to complete NETGEAR genie setup.
NETGEAR genie guides you through connecting the modem router to the Internet.
If the browser cannot display the web page:
• Make sure that the computer is connected to one of the four LAN Ethernet ports or
wirelessly to the modem router.
• Make sure that the modem router Power LED is solid green and the WiFi LED is lit.
• Close and reopen the browser or clear the browser cache.
• Browse to http://www
.routerlogin.net.
• If the computer is set to a static or fixed IP address (this is uncommon), change it to
obtain an IP address automatically from the modem router.