Filter
Top Products
Advanced Settings
126
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
5. Specify the IPv6 filtering mode by selecting one of the following radio buttons:
• Secured. In the secured mode, which is the default mode, the modem router inspects
both TCP and UDP packets.
• Open. In the open mode, the modem router inspects UDP packets only.
6. Click the Apply button.
Y
our settings are saved.
IPv6 Auto Config
To set up an IPv6 Internet connection through auto configuration:
1. Select ADVANCED > Advanced Setup > IPv6
.
2. From the Internet Connection Type menu, select Auto Config
.
The screen adjusts:
The modem router automatically detects the information in the following fields:
• Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the modem router’
s WAN (or Internet) interface. The number after the slash (/) is
the length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN1. This field shows the IPv6 address that is acquired
for the modem router’s LAN interface.
The number after the slash (/) is the length of
the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.