Filter
Top Products
Security
73
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
• Single address. Type the required address in the Start field.
• Address range. T
ype the start address for the range in the Start field and the end
address for the range in the End field.
7. Specify whether traffic covered by this rule is logged:
• Never. The modem router never logs traffic covered by this rule, whether it matches
or not.
• Always. The modem router logs traffic that is covered by this rule, whether it matches
or not.
Logging can be useful when you are debugging your rules.
8. Click the Add button.
The new firewall rule is added to the Outbound Services table on the Firewall Rules
screen. The firewall rule is enabled by default.
To disable an existing outbound firewall rule:
1. Select ADVANCED > Security > Firewall Rules.
The Firewall Rules screen displays.
2. In the Outbound Services table, clear the Enable
check box for the firewall rule that you
want to disable.
3. Click the Apply button.
Your settings are saved.
To change an existing outbound firewall rule:
1. Select ADVANCED > Security > Firewall Rules.
The Firewall Rules screen displays.
2. In the Outbound Services table, select the radio button to the left of the firewall rule that you
want to change.
3. Click the Edit
button.
The Block Services Setup screen displays. This screen has the same fields as the
Outbound Firewall Rule screen on which you can set up a new firewall rule.
4. Change the settings of the firewall rule.
5. Click the Accept button.
The changed settings of the firewall rule are shown in the Outbound Services table on the
Firewall Rules screen.
The firewall rule is enabled by default.
To remove an existing outbound firewall rule:
1. Select ADVANCED > Security > Firewall Rules.
The Firewall Rules screen displays.
2. In the Outbound Services table, select the radio button to the left of the firewall rule that you
want to remove.