Filter
Top Products
NETGEAR genie Basic Settings
25
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
The fields that display on the Internet Setup screen depend on whether your Internet
connection requires a login.
If your Internet connection does require a login, the fields that display also depend on the
selected encapsulation method and whether you select the T-Online, T&T, or Other radio
button. The settings are described in the following sections.
2. From WAN menu in the upper left of the screen, select the W
AN interface, as directed by
your ISP.
• W
AN1. Interface WAN2 is used for regular Internet service. This is the default
selection.
• WAN2. Interface WAN2 is used for IPTV only. When you select W
AN2, the No radio
button is selected automatically, and the screen adjusts.
Note: The Router Mode menu next to the WAN menu is fixed at the Router
Mode selection.
3. If you selected W
AN1 from the W
AN menu, select the Yes or No radio button.
• Yes. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No. Enter the account and domain names, only if needed.
4. Enter the settings for the IP address and DNS server
.
The default settings usually work fine. If you have problems with your connection, check
the ISP settings.
5. Click the Apply
button.
Your settings are saved.
6. T
o test your Internet connection, click the T
est button.
If the NETGEAR website does not display within one minute, see Chapter 8,
Troubleshooting.
The following sections describe all of the possible fields on the Internet Setup screen.
Internet Setup Screen Fields: No Login Required
These fields display only when no login is required, that is, when you select No radio button.
• Account Name (If required). Enter the account name provided by your ISP.
This might
also be called the host name.
• Domain Name (If required). Enter the domain name provided by your ISP.
Internet IP
Address.
• Get Dynamically from ISP. Y
our ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.