Filter
Top Products
NETGEAR genie Basic Settings
26
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
• Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP’s modem router to which your
modem router connects.
• Use IP Over ATM (IPoA). Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned for your IPoA service.
The gateway is the ISP’s modem
router to which your modem router connects.
For the Domain Name Server (DNS) Address, Router MAC Address, and NAT (Network
Address Translation) sections, see Internet Setup Screen Fields: Fields That Display
Irrespective of Whether Login Is Required
on page 30.
Internet Setup Screen Fields: Login Required
These fields display only when your ISP requires a login, that is, when you select the Yes
radio button. The fields that display also depend on the selected encapsulation method and
whether you select the T-Online, T&T, or Other radio button.
Encapsulation is PPPoE and Your ISP is T-Online
These fields display only when you select PPPoE from the Encapsulation menu and the
T-Online radio button.
Figure 12. Internet Setup screen: fields that are specific to the T-Online selection
• Connection identifier. The connection identifier that T-Online provides.
• T-Online number. The online number that
T-Online provides.
• Co-user suffix. The co-user suffix that
T-Online provides.
• Password. The password that you use to log in to T
-Online.
• Service Name (if Required). If T-Online provided a service name, enter it here.
• Connection Mode
. This field is masked out and not available.
• Idle Timeout (In Minutes). This field is masked out and not available.