Filter
Top Products
NETGEAR genie ADVANCED Home
67
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
Bandwidth Control
Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the
modem router to the Internet.
To set the maximum uplink bandwidth:
1. Select ADVANCED > Setup > QoS Setup.
2. Select the Turn Bandwidth Control On check box.
3. Select the Automatically check Internet Uplink bandwidth radio button.
4. Click the Check button.
The modem router detects the available uplink bandwidth. After about one minute, the
available bandwidth displays onscreen.
This information can help you to determine the
maximum bandwidth setting that you want to allow.
5. Select the
Uplink bandwidth radio button.
6. Enter the maximum bandwidth that you want to allow.
7. Select either Kbps
or Mbps.
8. Click the Apply button.
Your settings are saved.