Filter
Top Products
Supplemental Information
149
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
Factory Settings
You can return the modem router to its factory settings. On the right side panel of the modem
router, use the end of a paper clip or some other similar object to press and hold the Restore
Factory Settings button for at least seven seconds. (For more information about the location
of the button, see Side Panel with Restore Factory Settings Button on page 12.) The modem
router returns to the factory settings shown in the following table.
Table 3. Factory default settings
Feature Default Behavior
Router Login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default address
WAN MTU size 1492
Port speed AutoSensing
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Enabled or disabled
Time zone GMT for WW except GR, GMT+1 for GR, GMT-8 for NA
Time zone adjusted for daylight
savings time
Disabled
SNMP Disabled
Firewall Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering Disabled