Filter
Top Products
NETGEAR genie Basic Settings
44
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
4. (Optional) Change the name of the guest network.
The default names are NETGEAR-Guest1, NETGEAR-Guest2, and NETGEAR-Guest3.
The guest network name is case-sensitive and can be up to 32 characters. You then
manually configure the wireless devices in your network to use the guest network name in
addition to the main SSID.
5. Select a security option from the menu and configure the associated settings.
The security options are described in the following sections:
• Security Options: WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode
on page 39
• Security Options: WPA/WPA2 Enterprise on page 40
• Security Options: WEP on page 41
6. Click the Apply button.
Your settings are saved.
View Attached Devices
You can view all computers and devices that are currently connected to your network.
To go to the Attached Devices screen:
1. From the BASIC Home screen, select Attached Devices.
Wired devices are connected to the modem router with Ethernet cables. Wireless devices
have joined the wireless network. The following information is displayed:
• # (number). The order in which the device joined the network.
• IP Address. The IP address that the modem router assigned to this device when it
joined the network. This number can change if a device is disconnected and rejoins
the network.