Filter
Top Products
NETGEAR genie Basic Settings
28
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
Encapsulation is PPPoE and Your ISP is Other
These fields display only when you select PPPoE from the Encapsulation menu and the
Other radio button.
Figure 14. Internet Setup screen: fields that are specific to the Other selection
• Login. The login name that you use to log in to your ISP. By default, the login name is
guest.
• Password. The password that you use to log in to your ISP.
• Service Name (if Required)
. If your ISP provided a service name, enter it here.
• Connection Mode.
This field is masked out and not available.
• Idle Timeout (In Minutes). This field is masked out and not available.
Internet IP Address
.
• Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address.
Your ISP
automatically assigns these addresses.
• Use Static IP Address. Enter the static IP address that your ISP provides.
For the Domain Name Server (DNS)
Address, Router MAC Address, and NAT (Network
Address Translation) sections, see Internet Setup Screen Fields: Fields That Display
Irrespective of Whether Login Is Required
on page 30.