Filter
Top Products
Advanced Settings
106
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
To configure the modem router as a repeater:
1. Select ADVANCED > Advanced Setup > Wireless Repeating Function.
The Wireless Repeating Function screen displays. The wireless MAC address of the
modem router is displayed onscreen.
2. Select the Enable Wireless Repeating Function check box.
3. Select the Wireless Repeater radio button.
4. Fill in the Repeater IP Address fields.
This IP address needs to be in the same subnet as the base station, but different from the
LAN IP address of the base station.
5. (Optional) Select the Disable Wireless Client Association
check box.
Wireless clients are prevented from associating with the repeater and LAN client
associations only are allowed. You can leave the check box cleared if you prefer wireless
clients to be able to associate with the repeater
.
6. In the Base Station MAC Address field, enter the MAC addresses for the access point that
you want to function as the base station.
7. Click the Apply button.
Y
our settings are saved.
8. V
erify connectivity across the LANs:
• Verify that a computer on any wireless or wired LAN segment of the base station or a
repeater can connect to the Internet.
• Verify that any computer that is connected to the base station can share files and
printers with any other wireless or wired computer or server that is connected to a
repeater, and the other way around.