Filter
Top Products
Power On by LAN/Wake Up from wired LAN
- When these functions are enabled, power is consumed even if the computer is in sleep
*1
,
hibernation, or powered off. Be sure to use the AC adaptor.
- Even when a password is set in the Setup Utility and [Password On Boot] is set to
[Enabled], entering the password is unnecessary for turning on or resuming the
computer.
- The Power On by LAN function is off under the following conditions:
When you turn the computer off by pressing the power switch for 4 seconds or longer (e.g.,
after a hung-up).
When you reattach the AC adaptor and battery pack to the computer after removing them.
- The screen remains dark when the computer resumes from sleep
*1
. The previous screen
display will be restored when you touch the keyboard, touch pad, touchscreen (only for
model with touchscreen).
*1 : Windows XP: standby
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network
server via the internal LAN port.
1. Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility.
2. In [Caution], press «Enter».
3. Press «F10», and then select [Yes] and press «Enter».
4. Log on to Windows as an administrator.
5.
Click (Start) - [Computer] - [System properties] - [Device Manager].
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager].
NOTE
Pa
g
e 3 of 5LAN
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...