Filter
Top Products
Select [Auto] (default) or [High Temperature] in [Environment] of the [Main] menu of the Setup
Utility.
- Note that a level corresponding to a 100% charge for high temperature mode is
approximately equivalent to an 80% charge level for normal temperature mode.
- After switching from [Normal Temperature] to [High Temperature] or vice versa, the
remaining battery capacity will not be displayed correctly until the battery pack is
completely discharged or fully charged.
- In the [Auto] mode:
Once the computer has automatically switched from the normal temperature mode to
the high temperature mode, the computer will not switch back to the normal temperature
mode until the battery has been used and recharged to a total charge level of about 5
times as much as that of the fully-charged state. This is to avoid battery deterioration.
Computer behavior with low battery
The default settings are as follows.
NOTE
When the battery level becomes
10%
[Low battery alarm]
When the battery level becomes 5%
[Critical battery alarm]
Displays a message that the
battery level is low.
The computer enters hibernation.
Displays a message that the battery level is low,
and then the computer enters hibernation.
↓↓
Charge the battery. Connect the AC adaptor or replace the battery to start up
the computer.
Connect the AC adaptor
immediately. If you do not
have the AC adaptor, exit the
running programs and
Windows, then confirm that
the power indicator is off.
If you have a fully charged
Connect the AC adaptor and charge the battery.
If you have a fully charged spare battery, turn off
the computer, replace the battery and turn the
computer on again.
When the computer enters hibernation with the
Pa
g
e 6 of 11Batter
y
Powe
r
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...