Filter
Top Products
1. Click on the notification area and click .
2. Select the USB device.
1. Double-click on the notification area.
2. Select the USB device, then click [Stop].
3. Follow the on-screen instructions.
These steps are not necessary when;
Removing the device after turning off the computer.
or is not displayed.
The device does not appear in the list in step 2.
2. Remove the USB device.
<Only for model with Smart Card slot>
- If you double-click or , [USB Smart Card Reader] is displayed in the list, but do not
select this item. Removing this item is not possible. Restart the computer in case you
select this.
- You may need to install the driver for the USB device. Follow the on-screen instructions
or refer to the instruction manual of the USB device.
- You may need to install the driver again when connecting the device to another port.
- When a USB device is connected, sleep
*1
and hibernation may not function normally. If
the computer does not start up normally, remove the USB device and restart the
computer.
- When the USB device is removed and then inserted while the computer is on, or
may appear in the Device Manager and the device may not be correctly recognized. In
this case, remove and connect the device again, or restart the computer.
- When a USB device is connected, power consumption increases. Remove the USB
device when it is not in use, especially when operating by battery power.
- If the computer enters sleep while a USB keyboard or mouse is connected, touching the
USB keyboard keys or mouse will resume the computer.
CAUTION
NOTE
Pa
g
e 2 of 3USB Devices
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...