Filter
Top Products
*3 : Windows XP: [start]
Wireless Communication (only for model with wireless LAN/Bluetooth/wireless
WAN)
network.
Setup Utility.
Cannot check the
computer’s MAC address.
Follow the steps below.
1. Click (Start)
*3
- [All Programs] - [Accessories] -
[Command Prompt].
2.
Input "getmac /fo list /v", and press «Enter».
Insert a space between "fo" and "list", and between
"list" and "/v".
Input "ipconfig /all", and press «Enter».
3. Wireless LAN’s MAC address:
Make a note of the 12-digit string of alphanumeric displayed
on "Physical Address" line of "Wireless Network
Connection".
Wired LAN’s MAC address:
Make a note of the 12-digit string of alphanumeric displayed
on "Physical Address" line of "Local Area Connection".
4. Input "exit", and press «Enter».
Cannot connect to a
network.
Slide the wireless switch to turn on the wireless devices.
Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to
[Enabled] in the [Advanced] menu of the Setup Utility ( Wireless
Configuration).
Disable the Wireless Connection Disable Utility.
Restart the computer.
Access point is not
detected.
Shorten the distance between the computer and the access point,
and try the detection again.
Confirm the following settings:
[Wireless LAN] in the [Advanced] menu of the Setup Utility
Confirm that [Wireless LAN] is set to [Enabled].
Wireless Switch
Slide the wireless switch to ON.
Pa
g
e 6 of 18Troubleshootin
g
(Advanced)
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...