Filter
Top Products
computer. Do not connect it via a USB hub or USB connector of
the port replicator. If you have connected to a USB port on the
computer, try connecting it to one of the other USB ports.
Set [USB Port] and [Legacy USB Support] to [Enabled] in the
[Advanced] menu of the Setup Utility.
Set [Boot Option #1] to [USB Floppy Disk] in the [Boot] menu of
the Setup Utility.
Turn off the computer and connect the USB floppy disk drive, and
then restart the computer.
The RAM module is not
recognized.
Insert the RAM module correctly.
Use the compatible RAM module ( RAM Module).
Check the [Information] menu in the Setup Utility. If the RAM
module is not recognized, turn off the computer and reinsert the
RAM module.
You do not know the
address map for IRQ, I/O
port address, etc.
You can check with the following procedure.
1. Click (Start) - [Computer] - [System properties] - [Device
Manager].
A standard user needs to enter an administrator
password.
2. Click [View] - [Resources by type].
To check the current address map, click [Start] - [Control Panel] -
[Performance and Maintenance] - [System] - [Hardware] - [Device
Manager] - [View] - [Resources by type].
The device connected to the
serial port does not work.
Check the connection.
The device driver may not work. Refer to the instruction manual
of the device.
Do not connect 2 mouse devices simultaneously.
Set [Touch Pad] to [Disabled] in the [Main] menu of the Setup
Utility.
Set [Serial Port] to [Enabled] in the [Advanced] menu of the Setup
Utility.
Cannot print.
Check the printer connection.
Turn on the printer.
The printer is not online.
No paper is in the printer tray or there is a paper jam.
Pa
g
e 9 of 18Troubleshootin
g
(Advanced)
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...