Filter
Top Products
*4 : In the case of wireless communications, the frequency band being used can be divided into
segments, so that different communications can be conducted on each band segment. A "Channel"
refers to the individual frequency bandwidth divisions.
Wireless Switch Utility
Confirm that Wireless LAN is ON.
<Only for model with Intel
®
Centrino
®
Advanced N-6205>
Confirm that / / is displayed on the notification area.
If / / is not displayed on the notification area, turn on
the wireless communication ( Turning on/off the wireless LAN
communication).
<Only for model with Atheros AR928X>
Confirm that / / / is displayed on the notification
area.
If / / / is not displayed on the notification area, turn
on the
wireless communication ( Turning on/off the wireless LAN
communication).
This computer uses channels 1 through 11
*4
when using
IEEE802.11b/g. Check the channel being used by the access
point.
<Only for model with
wireless WAN>
Cannot communicate.
Confirm that wireless switch is in ON.
Confirm that [Wireless WAN] is set to [Enabled] in the [Advanced]
menu of the Setup Utility.
Use the Wireless Switch Utility and confirm that the wireless
WAN is on.
Confirm that the SIM card is inserted correctly.
If communication is not established after proceeding with the above
remedies, the wireless WAN device may not be correctly recognized.
Restart the computer.
<Only for model with
wireless WAN>
Cannot connect to the
mobile broadband network.
When you connect to the mobile broadband network for the first
time, proceed as follows.
1. Click to open [Connect to a Network], select [Mobile
Broadband Network] and then click [Connect].
A message appears to show that connection has failed.
2. Right-click [Mobile Broadband Network] and select
[Properties].
3. Set the APN, user name and password.
4. Repeat step 1.
Pa
g
e 7 of 18Troubleshootin
g
(Advanced)
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...