Filter
Top Products
fingerprint sensor. This mode allows up to about 21 fingerprints to be
enrolled.
Enrollment to the hard disk
All enrolled fingerprints are stored on the hard disk. Hardware protection of
the user data is not possible, but multiple users can enroll their fingerprints.
Follow the on-screen instructions.
- Enroll at least two fingers. Even if one of them is injured, you can use
another one to access your account and secret data. For further
information about the enrollment, refer to How to Use the Fingerprint
Reader and [Tutorial].
1. Click (Start)
*2
- [All Programs] - [Protector Suite] - [Control Center]
- [Help] - [Tutorial].
We recommend you use the Power-on Security feature. This feature prevents
unauthorized access to the user’s computer at the BIOS level.
1. Click (Start)
*2
- [All Programs] - [Protector Suite] - [Control Center].
2. Click [Identity] - [Status].
3. Click [Power-on security status] - [Change].
4. Click [Edit], and Add the check mark to [Enable power-on security], and then
click [Apply].
5. Click [Identity] - [Power-on Password].
6. When the "Power-on Security" screen appears, click [Manage Passwords...].
7. Select [Power-On] in [Password Types], and click [Set password...].
8. Enter the Power-On password, and click [OK].
9. Click [Close].
10. Add a check mark for [Power-On] in [Password Types].
11. Enter the Power-On password, and click [OK].
12. Click [Apply].
*2 : Windows XP: [start]
More Advanced Security
You can increase your computer’s security level by setting the BIOS level described in this section.
Performed by the Computer Administrator.
1. Register the Supervisor Password.
You have to register the Supervisor Password to proceed to the next step.
NOTE
Pa
g
e 6 of 12Fin
g
erprint Reade
r
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...