Filter
Top Products
By clicking the icon, you can execute the following operations:
: Start the diagnostic check from the beginning
: Stop the diagnostic check (You cannot restart the check partway through by
clicking )
: Display help (click the screen or press «Space» to return to the original
diagnostic check screen)
You can check the status of the diagnostic check by the display color on the left side of the
hardware icon (A).
Aqua: Not running diagnostic check
Alternating blue and yellow: Currently running diagnostic check. The interval of the
alternating colors differs depending on the type of diagnostic check currently
running.
During memory diagnostic check, the display may freeze for a long period of time.
Wait until the process is complete.
Green: No problems discovered
Red: Problems discovered
- Using the following procedure, you can run a diagnostic check on a specified
hardware component, or run an extended diagnostic check on the memory or the
hard disk (The extended diagnostic check is only for the memory and the hard
disk). The extended diagnostic check is more detailed, and so requires a longer
period of time to run.
1. Click to stop the diagnostic check.
2. Click the icon for the hardware that is not to be checked
, so that the icon is
displayed in gray (B).
When running a check on the memory or the hard disk, clicking the icon once will
turn on the extended diagnostic check ("FULL" (C) will be displayed below the
icon); click again, and the icon will be displayed in gray (D).
NOTE
Pa
g
e 4 of 5Hardware Dia
g
nostics
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...