Filter
Top Products
Hard Disk Data Erase Utility
When disposing the computer or transferring the ownership, erase all hard disk data in order to
avoid data leakage. Even if you erase the data or initialize the hard disk using normal Windows
commands, the data can be read with some special software. Use the hard disk data erase utility to
erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a
violation of the software’s license agreement.
- Even if hard disk data erase is performed, the number of times of DVD’s region code
setting will not be reset.
- This utility cannot erase data for specific partitions. However, the entire hard disk data
including the data of the partition with recovery tools will be erased.
Preparation
Remove all peripherals.
Connect the AC adaptor and do not remove it until hard disk data erase is complete.
1. Turn off the computer.
2. Turn on the computer, and press «F2» or «Del» while [Panasonic] boot screen is
displayed.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
3. Select [Repair Your Computer] in [Exit].
4. Click [Erase the whole data on the Hard Disk for security] and click [Next].
The hard disk data erase utility erases data using an overwriting method, but there is a possibility
that due to malfunctions or other operational errors, data may not be completely erased. There are
also specialized devices that may be able to read data that has been erased using this method. If
you need to erase highly confidential data, we recommend that you contact a company that
specializes in this process. Panasonic Corporation will bear no responsibility for losses or
damages suffered as a result of the use of this utility.
NOTE
Pa
g
e 1 of 2Hard Disk Data Erase Utilit
y
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...